From Wikipedia, the free encyclopedia
This article is about the extraction of geological materials from the earth. For the municipality in
Austria, see
Mining, Austria.
Break time underground,Colorado, ca. 1900
Mining is the extraction of valuable minerals or other geological materials from the earth, usually from an ore body, vein or (coal) seam. Materials recovered by mining include base metals, precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash. Any material that cannot be grown through agricultural processes, or created artificially in a laboratory or factory, is usually mined. Mining in a wider sense comprises extraction of any non-renewable resource (e.g., petroleum, natural gas, or even water).
Mining of stone and metal has been done since pre-historic times. Modern mining processes involve prospecting for ore bodies, analysis of the profit potential of a proposed mine, extraction of the desired materials and finally reclamation of the land to prepare it for other uses once the mine is closed. The nature of mining processes creates a potential negative impact on the environment both during the mining operations and for years after the mine is closed. This impact has led to most of the world’s nations adopting regulations to moderate the negative effects of mining operations. Safety has long been a concern as well, though modern practices have improved safety in mines significantly. Mining today is able to profitably and safely recover minerals with little negative impact to the environment.
[edit]History
[edit]Prehistoric mining
Since the beginning of civilization people have used stone, ceramics and, later, metals found on or close to the Earth’s surface. These were used to manufacture early tools and weapons, for example, high quality flint found in northern France and southern England were used to create flint tools.[1]Flint mines have been found in chalk areas where seams of the stone were followed underground by shafts and galleries. The mines at Grimes Gravesare especially famous, and like most other flint mines, are Neolithic in origin (ca 4000 BC-ca 3000 BC). Other hard rocks mined or collected for axes included the greenstone of the Langdale axe industry based in the English Lake District.
The oldest known mine on archaeological record is the “Lion Cave” in Swaziland. At this site, which by radiocarbon dating proves the mine to be about 43,000 years old, paleolithic humans mined mineral hematite, which contained iron and was ground to produce the red pigment ochre.[2][3] Mines of a similar age in Hungary and are believed to be sites where Neanderthals may have mined flint for weapons and tools.
[edit]Ancient Egypt
Ancient Egyptians mined malachite at Maadi.[4] At first, Egyptians used the bright green malachite stones for ornamentations and pottery. Later, between 2,613 and 2,494 BC, large building projects required expeditions abroad to the area of Wadi Maghara in order “to secure minerals and other resources not available in Egypt itself.”[5] Quarries for turqoise and copperwere also found at “Wadi Hamamat, Tura, Aswan and various other Nubian sites”[5] on the Sinai Peninsula and at Timna. Mining in Egypt occurred in the earliest dynasties, and the gold mines of Nubia were among the largest and most extensive of any in Ancient Egypt, and are described by the Greek author Diodorus Siculus. He mentions that fire-setting was one method used to break down the hard rock holding the gold. One of the complexes is shown in one of earliest known maps. They crushed the ore and ground it to a fine powder before washing the powder for the gold dust.
[edit]Ancient Greece and Rome
Agricola, author of De Re Metallica
Drainage wheel from Rio Tinto mines
Mining in Europe has a very long pedigree, examples including the silver mines of Laurium, which helped support the Greek city state of Athens. However, it is the Romans who developed large scale mining methods, especially the use of large volumes of water brought to the minehead by numerous aqueducts. The water was used for a variety of purposes, including using it to remove overburden and rock debris, called hydraulic mining, as well as washingcomminuted or crushed ores, and driving simple machinery. They used hydraulic mining methods on a large scale to prospect for the veins of ore, especially a now obsolete form of mining known as hushing. It involved building numerous aqueducts to supply water to the minehead where it was stored in large reservoirs and tanks. When a full tank was opened, the wave of water sluiced away the overburden to expose the bedrock underneath and any gold veins. The rock was then attacked by fire-setting to heat the rock, which would be quenched with a stream of water. The thermal shock cracked the rock, enabling it to be removed, aided by further streams of water from the overhead tanks. They used similar methods to work cassiterite deposits in Cornwall and lead ore in the Pennines. The methods had been developed by the Romans in Spain in 25 AD to exploit large alluvial gold deposits, the largest site being atLas Medulas, where seven long aqueducts were built to tap local rivers and to sluice the deposits. Spain was one of the most important mining regions, but all regions of the Roman Empire were exploited. They used reverse overshot water-wheels for dewatering their deep mines such as those at Rio Tinto. In Great Britain the natives had minedminerals for millennia ,[6] but when the Romans came, the scale of the operations changed dramatically. The Romans needed what Britain possessed, especially gold, silver, tin and lead. Roman techniques were not limited to surface mining. They followed the ore veins underground once opencast mining was no longer feasible. At Dolaucothi they stoped out the veins, and drove adits through barren rock to drain the stopes. The same adits were also used to ventilate the workings, especially important when fire-setting was used. At other parts of the site, they penetrated the water table and dewatered the mines using several kinds of machine, especiallyreverse overshot water-wheels. These were used extensively in the copper mines at Rio Tinto in Spain, where one sequence comprised 16 such wheels arranged in pairs, and lifting water about 80 feet (24 m). They were worked as treadmills with miners standing on the top slats. Many examples of such devices have been found in old Roman mines and some examples are now preserved in the British Museum and the National Museum of Wales.[7]
[edit]Medieval Europe
Mining in the Medieval period is best known through the work De Re Metallica (1556) of Georg Agricola, who described many different mining methods then used in German and Saxon mines. Use of water power in the form of water mills was extensive; they were employed in crushing ore, raising ore from shafts and ventilating galleries by powering giant bellows. Black powder was first used in mining in Selmecbánya, Kingdom of Hungary (present-day Banská Štiavnica,Slovakia) in 1627.[8] This allowed blasting of rock and earth to loosen and reveal ore veins, which was much faster than fire setting. In 1762, the world’s first mining academy was established in the same town.
[edit]North and South America
In North America there are ancient, prehistoric copper mines along Lake Superior.[9][10] “Indians availed themselves of this copper starting at least 5000 years ago,”[9] and copper tools, arrowheads, and other artifacts that were part of an extensive native trade network have been discovered. In addition, obsidian, flint, and other minerals were mined, worked, and traded.[10] While the early French explorers that encountered the sites made no use of the metals due to the difficulties in transporting it,[10] the copper was eventually traded throughout the continent along major river routes. In Manitoba, Canada, there also are ancient quartz mines near Waddy Lake and surrounding regions.[11]
In the early colonial history of the Americas, “native gold and silver was quickly expropriated and sent back to Spain in fleets of gold- and silver-laden galleons”[12] mostly from mines in Central and South America. Turquoise dated at 700 A.D. was mined in pre-ColumbianAmerica; in the Cerillos Mining District in New Mexico, estimates are that “about 15,000 tons of rock had been removed from Mt Chalchihuitl using stone tools before 1700.”[13][14]
Mining in the United States became prevalent in the 19th century. As with the California Gold Rush in the mid 1800s, mining for minerals and precious metals, along with ranching, was a driving factor in the Westward Expansion to the Pacific coast. With the exploration of the West, mining camps were established and “expressed a distinctive spirit, an enduring legacy to the new nation;” Gold Rushers would experience the same problems as the Land Rushers of the transient West that preceded them.[15] Aided by railroads, many traveled West for work opportunities in mining. Western cities such as Denver and Sacramento originated as mining towns.
[edit]Mining methods and procedures
[edit]Steps of mine development
The process of mining from discovery of an ore body through extraction of minerals and finally to returning the land to its natural state consists of several distinct steps. The first is discovery of the ore body, which is carried out through prospecting or exploration to find and then define the extent, location and value of the ore body. This leads to a mathematical resource estimation to estimate the size and grade of the deposit. This estimation is used to conduct a pre-feasibility study to determine the theoretical economics of the ore deposit. This identifies, early on, whether further investment in estimation and engineering studies is warranted and identifies key risks and areas for further work. The next step is to conduct a feasibility study to evaluate the financial viability, technical and financial risks and robustness of the project. This is when the mining company makes the decision to develop the mine or to walk away from the project. This includes mine planning to evaluate the economically recoverable portion of the deposit, the metallurgy and ore recoverability, marketability and payability of the ore concentrates, engineering concerns, milling and infrastructure costs, finance and equity requirements and an analysis of the proposed mine from the initial excavation all the way through to reclamation. Once the analysis determines a given ore body is worth recovering, development begins to create access to the ore body. The mine buildings and processing plants are built and any necessary equipment is obtained. The operation of the mine to recover the ore begins and continues as long as the company operating the mine finds it economical to do so. Once all the ore that the mine can produce profitably is recovered, reclamation begins to make the land used by the mine suitable for future use.
[edit]Mining techniques
Mining techniques can be divided into two common excavation types: surface mining and sub-surface (underground) mining. Mining targets are divided into two general categories of materials: placer deposits, consisting of valuable minerals contained within river gravels, beach sands, and other unconsolidated materials; and lode deposits, where valuable minerals are found in veins, in layers, or in mineral grains generally distributed throughout a mass of actual rock. Both types of ore deposit, placer or lode, are mined by both surface and underground methods.
Processing of placer ore material consists of gravity-dependent methods of separation, such as sluice boxes. Only minor shaking or washing may be necessary to disaggregate (unclump) the sands or gravels before processing. Processing of ore from a lode mine, whether it is a surface or subsurface mine, requires that the rock ore be crushed and pulverized before extraction of the valuable minerals begins. After lode ore is crushed, recovery of the valuable minerals is done by one, or a combination of several, mechanical and chemical techniques.
Some mining, including much of the uranium mining being done today, is done by less-common methods, such as in-situ leaching: this technique involves digging neither at the surface nor underground. The extraction of target minerals by this teqhnique requires that they be soluble, e.g., potash, potassium chloride, sodium chloride, sodium sulfate and uranium oxide which dissolve in water.[16][17]
Surface mining is done by removing (stripping) surface vegetation, dirt, and if necessary, layers of bedrock in order to reach buried ore deposits. Techniques of surface mining include; Open-pit mining which consists of recovery of materials from an open pit in the ground, quarrying or gathering building materials from an open pit mine, strip mining which consists of stripping surface layers off to reveal ore/seams underneath, and Mountaintop removal, commonly associated with coal mining, which involves taking the top of a mountain off to reach ore deposits at depth. Most (but not all) placer deposits, because of their shallowly-buried nature, are mined by surface methods. Landfill miningfinally are sites where landfills are excavated and processed.[18]
Sub-surface mining consists of digging tunnels or shafts into the earth to reach buried ore deposits. Ore, for processing, and waste rock, for disposal, are brought to the surface through the tunnels and shafts. Sub-surface mining can be classified by the type of access shafts used, the extraction method or the technique used to reach the mineral deposit. Drift mining utilizes horizontal access tunnels, slope mining uses diagonally sloping access shafts and shaft mining consists of vertical access shafts. Other methods include shrinkage stope mining which is mining upward creating a sloping underground room, long wall mining which is grinding a long ore surface underground and room and pillar which is removing ore from rooms while leaving pillars in place to support the roof of the room. Room and pillar mining often leads to retreat mining which is removing the pillars which support rooms, allowing the room to cave in, loosening more ore. Additional sub-surface mining methods include Hard rock mining which is mining of hard materials, bore hole mining, drift and fill mining, long hole slope mining, sub level caving and block caving
[edit]Machinery
Gold-bearing gravels are shoveled into a trommel at the Blue Ribbon placer mine, Alaska.
Heavy machinery is needed in mining for exploration and development, to remove and stockpile overburden, to break and remove rocks of various hardness and toughness, to process the ore and for reclamation efforts after the mine is closed. Bulldozers, drills, explosives and trucks are all necessary for excavating the land. In the case of placer mining, unconsolidated gravel, or alluvium, is fed into machinery consisting of a hopper and a shaking screen or trommel which frees the desired minerals from the waste gravel. The minerals are then concentrated using sluices or jigs. Large drillsare used to sink shafts, excavate stopes and obtain samples for analysis. Trams are used to transport miners, minerals and waste. Lifts carry miners into and out of mines, as well as moving rock and ore out, and machinery in and out of underground mines. Huge trucks, shovels and cranes are employed in surface mining to move large quantities of overburden and ore. Processing plants can utilize large crushers, mills, reactors, roasters and other equipment to consolidate the mineral-rich material and extract the desired compounds and metals from the ore.
[edit]Extractive metallurgy
The science of extractive metallurgy is a specialized area in the science of metallurgy that studies the extraction of valuable metals from their ores, especially through chemical or mechanical means. Mineral processing (or mineral dressing) is a specialized area in the science of metallurgy that studies the mechanical means of crushing, grinding, and washing that enable the separation (extractive metallurgy) of valuable metals or minerals from their gangue (waste material). Since most metals are present in ores as oxides or sulfides, the metal needs to be reduced to its metallic form. This can be accomplished through chemical means such as smelting or through electrolytic reduction, as in the case of aluminum. Geometallurgycombines the geologic sciences with extractive metallurgy and mining.
[edit]Environmental effects
House in Gladbeck, Germany, with fissures caused by gravity erosion due to mining
Environmental issues can include erosion, formation of sinkholes, loss of biodiversity, and contamination of soil, groundwater and surface water by chemicals from mining processes. In some cases, additional forest logging is done in the vicinity of mines to increase the available room for the storage of the created debris and soil. [19] Besides creating environmental damage, the contamination resulting from leakage of chemicals also affect the health of the local population. [20] Mining companies in some countries are required to follow environmental and rehabilitation codes, ensuring the area mined is returned to close to its original state. Some mining methods may have significant environmental and public health effects.
Iron hydroxide precipitate stains a stream receiving acid drainage from surface coal mining.
Mining can have adverse effects on surrounding surface and ground water if protective measures are not taken. The result can be unnaturally high concentrations of some chemicals, such as arsenic, sulfuric acid, and mercury over a significant area of surface or subsurface. [21] Runoff of mere soil or rock debris -although non-toxic- also devastates the surrounding vegetation. The dumping of the runoff in surface waters or in forests is the worst otion here.Submarine tailings disposal is regarded as a better option (if the soil is pumped to a great depth.[22] Mere land storage and refilling of the mine after it has been depleted is, of course, even better; if no forests need to be cleared for the storage of the debris. There is potential for massive contamination of the area surrounding mines due to the various chemicals used in the mining process as well as the potentially damaging compounds and metals removed from the ground with the ore. Large amounts of water produced from mine drainage, mine cooling, aqueous extraction and other mining processes increases the potential for these chemicals to contaminate ground and surface water. In well-regulated mines, hydrologists and geologists take careful measurements of water and soil to exclude any type of water contamination that could be caused by the mine’s operations. The reducing or eliminating of environmental degradation is enforced in modern American mining by federal and state law, by restricting operators to meet standards for protecting surface and ground water from contamination. This is best done trough the use of non-toxic extraction processes as Bioleaching. If the project site besomes nonetheless polluted, mitigation techniques such as acid mine drainage (AMD) need to be performed.
The five principal technologies used to monitor and control water flow at mine sites are diversion systems, containment ponds, groundwater pumping systems, subsurface drainage systems, and subsurface barriers. In the case of AMD, contaminated water is generally pumped to a treatment facility that neutralizes the contaminants.[23] Some examples of areas affected by acid mine drainage are the Berkeley Pit, and the Wheal Jane Mines.
Dissolution and transport of metals and heavy metals by run-off and ground water is another example of environmental problems with mining, such as the Britannia Mine, a former copper mine near Vancouver, British Columbia. Tar Creek, an abandoned mining area in Picher, Oklahoma that is now an Environmental Protection Agencysuperfund site, also suffers from heavy metal contamination. Water in the mine containing dissolved heavy metals such as lead and cadmium leaked into local groundwater, contaminating it.[24] Long-term storage of tailings and dust can lead to additional problems, as they can be easily blown off site by wind, as occurred at Scouriotissa, an abandoned copper mine inCyprus. Erosion of exposed hillsides, mine dumps, tailings dams and resultant siltation of drainages, creeks and rivers can significantly impact the surrounding areas, a prime example being the giant Ok Tedi Mine in Papua New Guinea. In areas of wilderness mining may cause destruction and disturbance of ecosystems and habitats, and in areas of farming it may disturb or destroy productive grazing and croplands. In urbanised environments mining may produce noise pollution, dust pollution and visual pollution.
To ensure completion of reclamation, or restoring mine land for future use, many governments and regulatory authorities around the world require that mining companies post a bond to be held in escrow until productivity of reclaimed land has been convincingly demonstrated, although if cleanup procedures are more expensive than the size of the bond, the bond may simply be abandoned. Since 1978 the mining industry has reclaimed more than 2 million acres (8,000 km²) of land in the United States alone. This reclaimed land has renewed vegetation and wildlife in previous mining lands and can even be used for farming and ranching. For further reading on reclamation of former mining sites, please see Restoration ecology.
[edit]Mining industry
While exploration and mining can sometimes be conducted by individual entrepreneurs or small business, most modern-day mines are large enterprises requiring large amounts of capital to establish. Consequently, the mining sector of the industry is dominated by large, often multinational, mostly publicly-listed companies. See Mining Companies for a list. However, what is referred to as the ‘mining industry’ is actually two sectors, one specializing in exploration for new resources, the other specializing in mining those resources. The exploration sector is typically made up of individuals and small mineral resource companies dependent on public investment. The mining sector is typically large and multi-national companies sustained by mineral production from their mining operations. In addition to these two sectors, various other industries such as equipment manufacture, environmental testing and metallurgy analysis also rely on and support the mining industry throughout the world.
[edit]Corporate classifications
Mining companies can be classified based on their size and financial capabilities:
- Major companies are considered to have an adjusted annual mining-related revenue of more than US$500 million, with the financial capability to develop a major mine on its own.
- Intermediate companies have at least $50 million in annual revenue but less than $500 million.
- Junior companies rely on equity financing as their principal means of funding exploration. Juniors are mainly pure exploration companies, but may also produce minimally, and do not have a revenue of US$50 million.[25]
Danger sign at an old Arizona mine.
Safety has long been a controversial issue in the mining business especially with sub-surface mining. While mining today is substantially safer than it was in the previous decades, mining accidents are often very high profile, such as the Quecreek Mine Rescue saving 9 trapped Pennsylvania coal miners in 2002. Mining ventilation is a significant safety concern for many miners. Poor ventilation of the mines causes exposure to harmful gases, heat and dust inside sub-surface mines. These can cause harmful physiological effects, including death. The concentration of methane and other airborne contaminants underground can generally be controlled by dilution (ventilation), capture before entering the host air stream (methane drainage), or isolation (seals and stoppings).[26] Ignited methane gas is a common source of explosions in coal mines, or, the more violent coal dust explosions. Gases in mines can also poison the workers or displace the oxygen in the mine, causing asphixiation.[26] For this reason, the MHSA requires that workers have gas detection equipment in groups of miners. It must be able to detect common gases, such as CO, O2, H2S, and % Lower Explosive Limit. Additionally, further regulation is being requested for more gas detection as newer technology such as nanotechnology is introduced. High temperatures and humidity may result in heat-related illnesses, including heat stroke which can be fatal. Dusts can cause lung problems, includingsilicosis, asbestosis and pneumoconiosis (also known as miners lung or black lung disease). A ventilation system is set up to force a stream of air through the working areas of the mine. The air circulation necessary for the effective ventilation of a mine is generated by one or more large mine fans, usually located above ground. Air flows in one direction only, making circuits through the mine such that each main work area constantly receives a supply of fresh air.
Since mining entails removing dirt and rock from its natural location creating large empty pits, rooms and tunnels, cave-ins are a major concern within mines. Modern techniques for timbering and bracing walls and ceilings within sub-surface mines have reduced the number of fatalities due to cave-ins, but accidents still occur.[citation needed] The presence of heavy equipment in confined spaces also poses a risk to miners, and in spite of modern improvements to safety practices, mining remains dangerous throughout the world.
[edit]Abandoned mines
Abandoned mine in Nevada.
There are upwards of 560,000 abandoned mines on public and privately owned lands in the United States alone.[27][28] Abandoned mines pose a threat to anyone who may attempt to explore them without proper knowledge and safety training. Old mines are often dangerous and can contain deadly gases. Since weather may have eroded the earth and rock surrounding it, the entrance to an old mine in particular can be very dangerous. Old mine workings, caves, etc. are commonly hazardous simply due to the lack of oxygen in the air, a condition in mines known as blackdamp.
[edit]Hearing loss
Miners utilize equipment strong enough to break through extremely hard layers of the earth’s crust. This equipment, combined with the closed workspace that underground miners work in, can cause hearing loss.[29] For example, a roof bolter (commonly used by mine roof bolter operators) can reach sound power levels of up to 115 dB.[29] Combined with the reverberant effects of underground mines, a miner without proper hearing protection is not only at a high risk for hearing loss,[29] but is also going against OSHA standards[30].
[edit]Records
As of 2008, the deepest mine in the world is TauTona in Carletonville, South Africa at 3.9 kilometers[31], replacing Savuka Mine in the North West Province of South Africa at 3,774 meters[32]. East Rand Mine in Boksburg, South Africa briefly held the record at 3,585 meters, and the first mine declared the deepest in the world was also TauTona when it was at 3,581 meters. The deepest mine in Europe is Pyhäsalmi Mine in Pyhäjärvi, Finland at 1,444 meters. The second deepest mine in Europe is Boulby Mine England at 1,400 meters (shaft depth 1,100 meters)
The deepest open pit mine in the world is Bingham Canyon Mine in Bingham Canyon, Utah, United States at over 1,200 meters. The largest and second deepest open pit copper mine in the world is Chuquicamata in Chuquicamata, Chile at 900 meters, 940,600 tons of copper and 17,700 tons of molybdenum produced annually.[citation needed]
The largest underground mine: El Teniente, in Rancagua, Chile, 2,400 kilometers of underground drifts, 418,000 tons of copper yearly. The deepest borehole in the world is Kola Superdeep Borehole at 12,262 meters. This, however, is not a matter of mining but rather related to scientific drilling.
[edit]See also
[edit]References
- ^ Hartman, Howard L. SME Mining Engineering Handbook, Society for Mining, Metallurgy, and Exploration Inc, 1992, p3.
- ^ Swaziland Natural Trust Commission, “Cultural Resources – Malolotja Archaeology, Lion Cavern,” Retrieved August 27, 2007, [1].
- ^ Peace Parks Foundation, “Major Features: Cultural Importance.” Republic of South Africa: Author. Retrieved August 27, 2007, [2].
- ^ Shaw, I. (2000). The Oxford History of Ancient Egypt. New York: Oxford University Press, pp. 57-59.
- ^ a b Shaw, I. (2000). The Oxford History of Ancient Egypt. New York: Oxford University Press, p. 108.
- ^ The Independent, 20 Jan. 2007: The end of a Celtic tradition: the last gold miner in Wales
- ^ The Romans in Britain: mining
- ^ Heiss, A.G. & Oeggl, K. (2008). Analysis of the fuel wood used in Late Bronze Age and Early Iron Age copper mining sites of the Schwaz and Brixlegg area (Tyrol, Austria). Vegetation History and Archaeobotany17(2):211-221, Springer Berlin / Heidelberg, [3].
- ^ a b Lankton, L. (1991). Cradle to Grave: Life, Work, and Death at the Lake Superior Copper Mines. New York: Oxford University Press, p. 5-6.
- ^ a b c West, G.A. (1970). Copper: its mining and use by the aborigines of the Lake Superior region. Westport, Conn: Greenwood Press.
- ^ Bruno, L. & Heaman, L.M. (2004). Structural controls on hypozonal oroganic gold mineralization in the La Rouge Domain, Trans-Hudson Orogen, Saskatchewan. The Canadian Journal of Earth Sciences, Vol. 41, Issue 12, pp. 1453-1471.
- ^ Vaden, H.E. & Prevost. G. (2002). Politics of Latin America: The Power Game. New York: Oxford University Press, p. 34.
- ^ Maynard, S.R., Lisenbee, A.L. & Rogers, J. (2002). Preliminary Geologic Map of the Picture Rock 7.5 – Minute Quadrangle Sante Fe County, Central New Mexico. New Mexico Bureau of Geology and Mineral Resources, Open-File Report DM-49.
- ^ The Cerrillos Hills Park Coalition, (2000). Cerrillos Hills Historic Park Vision Statement. Public documents: Author. Retrieved August 27, 2007, [4].
- ^ Boorstin, D.J. (1965). The Americans: The National Experience. New York: Vintage Books, pp. 78-81.
- ^ http://world-nuclear.org/info/inf27.html
- ^ http://www.kazatomprom.kz/cgi-bin/index.cgi?p27&version=en
- ^ Landfill Mining Landfill Mining, Preserving Resources through Integrated Sustainable Management of Waste, Technical Brief from the World Resource Foundation
- ^ Logging of forests and debris dumping
- ^ Poisoning by mines
- ^ Gold mining causing mercury pollution
- ^ Soild diposal options
- ^ First International Conference on Mining Impacts to Human and Natural Environments (March 15, 2008)
- ^ Ottawa County, Oklahoma Hazardous Waste Sites
- ^ “Metals Economics Group World Exploration Trends Report“. Metals Economics Group Inc.. Retrieved on 2009-05-05.
- ^ a b “NIOSH Mining Safety and Health Ventilation“. United States National Institute for Occupational Safety and Health. Retrieved on 2007-10-29.
- ^ Kertes, N., (March, 1996). US abandoned mine count still a mystery – General Accounting Office report. American Metal Market, Retrieved August 27, 2007, [5]
- ^ People, Land, and Water (March, 2007). KEEP OUT! Old Mines Are Dangerous. Office of Surface Mining: U.S. Department of the Interior. Retrieved Aug, 27, 2007, [6]
- ^ a b c Peterson, J.S.; P.G. Kovalchik, R.J. Matetic (2006). “Sound power level study of a roof bolter” (PDF). Trans Soc Min Metal Explor (320): 171-7. Retrieved on 2009-06-16.
- ^ Franks, John R., ed. (1996), “Appendix A: OSHA Noise Standard Compliance Checklist“, Preventing Occupational Hearing Loss: A Practical Guide, U.S. Department of Health and Human Services, pp. 60
- ^ “TauTona, Anglo Gold – Mining Technology“. SPG Media Group PLC. 2009-01-01. Retrieved on 2009-03-02.
- ^ Naidoo, Brindaveni (2006-12-15). “TauTona to take ‘deepest mine’ accolade“. Creamer Media’s Mining Weekly Online. Retrieved on 2007-07-19.
[edit]External links
Case CX210B nool ulatub pui…
